Q&A AI
How do you use a pinch style drop shot weight?
Great question! Using a pinch style drop shot weight is quite straightforward and can be very effective for bass fishing. Based on the video context from Ott’s Garage | How To Drop Shot by OttDeFoe, here's a step-by-step guide:
-
Prepare Your Line and Hook: First, tie your drop shot hook to your main line using a Palomar knot or your preferred knot. Make sure to leave a long tag end, as this is where you'll attach your weight.
-
Select Your Pinch Style Weight: Pinch style drop shot weights are designed to be quick and easy to attach. They typically have a small wire clip or pinch mechanism at the top.
-
Attach the Weight:
- Open the Pinch Mechanism: Gently squeeze the pinch mechanism to open it up.
- Insert the Line: Slide the tag end of your line into the open pinch mechanism.
- Secure the Weight: Release the pinch mechanism to clamp down on the line. This should securely hold the weight in place.
-
Adjust if Necessary: If you need to adjust the depth at which your bait is presented, you can easily slide the weight up or down the line by opening the pinch mechanism and repositioning it.
-
Check the Setup: Make sure the weight is securely attached and that your hook is positioned correctly. The hook should sit at a 90-degree angle to the line, ensuring your bait is presented horizontally in the water column.
Tips for Using Pinch Style Drop Shot Weights:
- Quick Changes: One of the main advantages of pinch style weights is the ability to quickly change weights without retying. This is especially useful if you're fishing in varying depths or conditions.
- Avoiding Snags: These weights are designed to minimize snags in weeds and rocks, making them ideal for fishing in heavy cover.
- Monitoring Wear: Over time, the pinch mechanism can wear out. If you notice the weight slipping, it might be time to replace it.
Using pinch style drop shot weights can save you time and hassle on the water, allowing you to focus more on catching bass. If you have any more questions or need further clarification, feel free to ask! Happy fishing!
Related videos
Transcript
Video03:38
06:06
How To Tie a Drop Shot | Ladybass by Ladybass → finesse then I will fish this guy right here I don't really use this here drop much anymore unless I'm fishing really deep and I need to use 1/2 pounds or something like that those are the three main weights there are four drop shot fishing again depends what scenarios you are fishing I like fishing it between a half ounce I usually have a couple half ounce teardrop weights with me to Oh 1/8 ounce is a 1/8 ounce right here but I usually fish a 1/4 - 1 8 ounce cylinder or ball weights right here so now on to the rigging I'm going to show you guys two ways of reading a drop shot one was the octopus hook and one of the spin shot hook so I bring the camera a little closer to each so you guys can see what I'm doing with the line so I'm going to start off by showing you guys how to tie a drop shot with an octopus style hook so we're going to do is your going to thread the line through the eye of the hook you may tie a Palomar knot so you're going to bring the line back through the add the hook from the back the trick with this power or not is you want a really really long time that's where you're going to be tying your your line or your so your weight too so you're going to tie a Palomar
Transcript
Video01:20
02:41
How To Rig and Tie A Dropshot The Right Way | Bass Fishing by Bass Fishing Tips & Techniques by BassResource → Real simple, but that way it's a lot easier
for me and I feel it's a little more secure. All the time when I've tied polymer knots
versus uni, and I've done them on tests, I've found that the uni knot holds better and is
stronger. Anyway, to tie the weight at the end what
you want to use is a drop shot weight. This has a little swivel on it and it looks
really weird, but's that's it. The reason you want to use a weight like this
is because it doesn't get hung up in the weeds very much or it doesn't get hung up in rock
either. It's got a little swivel on the end. So, it's hard to see ... you can't even see
it spin, but it's a little swivel so it doesn't twist the line or anything. It's got this really weird ... I don't know
if you can see it or not, but it's really weird thing at the top and your first instinct
is to just tie directly to it, but that's not what you want to do. Instead, what you want to do is, one the tag
end, you want to tie a basic overhand knot. Just real simple. I know you can't see me doing this, but it
doesn't matter. I mean, trust me, it's not a fancy fishing
knot or anything. It's just your basic overhand knot. If my eyes will let me see it. It's really nothing more than that.
Transcript
Video03:49
06:04
Ott’s Garage | How To Drop Shot by OttDeFoe → just a little bit of pressure on that you can see that that hook point is going to be sitting upright so when i rig my bait on there it's going to be sitting horizontal in the water column okay so that's what we've got we've got that much tag if you wanted that much you're good to tie your knot or your your sinker on right now if not you could trim it down if you wanted more you got to cut it off and re-tie it with more tags so that's that's why it's so important to uh to adjust the amount of tag you've got when you're actually tying that hook on from the very first time so that because that's gonna again it's gonna give you how much tag you've got my drop shot weights i use the ones that have the loop on them i've used that style for a few years now i like it a lot better than the style that has the just the little pinch deal on the top um those little pinch they're super easy to use they go on there you know in just a split second slide it on pinch it on there you're good to go but so often when a fish jumps those small mouth jump and go crazy start shaking that sinker right there it's gone so you got to get another one out of the box and put it back on when
Transcript
Video04:08
05:24
Spring Drop Shot Tips That Make A Difference! | How to | Bass Fishing by Bass Fishing Tips & Techniques by BassResource → It's got a superior drag system to a bait
caster. So, that's why I would lean towards this. And most of the time, I am using light line. And again, I've taken this tagline now, it's
about 12 to 14 inches, and I've got a 1/4-ounce weight here. You can vary your weight, but I keep it pretty
simple on light line. I'm right around 1/4 a lot of times unless
I've got heavier current or, you know, I'm fishing deep or a lot of wind or something
like that, but most of the time, I'm just with, like, a little 1/4 ounce and 12, 14
inches, and that basically is gonna put it right in that strike zone. So, I'm gonna pick a target, especially in
the spring since we're talking specifically about spring fishing. I'm gonna pick a target. I've got a little dock pole over there. I'm gonna let it fall basically by it. And it's shallow there. So, I'm already on the bottom. I've got the line in my finger so I can feel
that, have that sensitivity there. And I'm gonna let it go to the bottom, and
I'm just gonna kill it there. I want that drop-shot weight to act like an
anchor and it suspends that bait there. So, then I'm gonna have it on the semi-slack
line. You don't want a whole bunch of slack because
you can't feel or tell what's going on there, and you don't want it real tight because when
they bite it, you want them to take it in.
Transcript
Video02:22
04:56
How To Tie a Drop Shot | Ladybass by Ladybass → personally do not like doing that I like Ty and Alberto no I think I use or a double uni knot but um ever since I switched to this hook right here I've been catching more fish had less issues and frustration on the water pushing a drop shot and I just have a lot of confidence in this hook right here this one right here is a VMC spin shot hook size one this is the main hook that I use for drop shotting now quickly onto the waist there are three main style of weights there is a cylinder weight you guys can see right here there is a tear drop weight you guys can see right here and there's a ball style weight you guys can see right here so this one obviously just because of the structure of it has a slowest rate of fall while the cylinder weight right here has the fastest rate of fall I throwing this guy in grass and in rocks just because I don't get hung up as often this the cylinder weight goes through the rock so the gradually easing comes out really easy but if I feel like the drop shot is falling too fast or something like that I will almost always switch to really light ball weight like so a lot slower it'll fall so if fish are grabbing it on the fall or I want to go little bit more
Transcript
Video00:00
01:33
How to Rig a Drop Shot by Wired2Fish → I'm going to show you how to rig a drop shot.
Basically I'm going to start out with 8 or 6-pound fluorocarbon line. Anything more than
8 pound line becomes extremely hard to manage on a spinning reel. So 6 or 8 pound line and
I use Seaguar InvizX and that works well for me. For a rod I recommend anything from 6'10
to 7'. i personally like a little stiffer rod when drop shooting. However, I know a
little softer rod is popular as well. You just need to find out what works for you.
This is a IRod Air Series, 6'10 medium action. I'll just a take a size 1 or 1/0 Owner Mosquito
hook and I'm going to tie palomar knot. But what you want to do is make sure you give
yourself plenty of tag space for your leader. Now it's important when tying the palomar
knot to make sure that the knot snitches down properly. You don't want the lines to cross
one another; you want them to run parallel. So that way the line won't cut into itself.
When it seats perfectly like that you're not going to have an issue with it. Now take
that tag end of the line and stick it back threw the eye of the hook from top to bottom.
What happens is when you pull that it's going to make you hook stand out at a 90-degree
angle from the line and that's exactly what you want. Then take your drop shot weight, this is a
Picasso Tungsten Casting Drop Shot Weight,
More General Answers
Loading...