Q&A AI

How to clear coat fishing lures?

Clear coating fishing lures is an important step in protecting the paint and adding a glossy finish to your lures. The process may vary depending on the type of lure and the materials you are using, but I can provide a general overview.

First, you'll want to make sure your lure is fully painted and any additional details, like eyes or decals, have been added. Once your paint is dry, it's time to apply the clear coat.

There are different types of clear coats you can use, such as two-part epoxy, UV clear spray, or specific clear coatings designed for fishing lures. The choice of clear coat will depend on your personal preference and the desired outcome.

If you're using a two-part epoxy, you'll need to mix the epoxy according to the instructions and apply it evenly to the lure. This type of clear coat provides a strong and durable finish but may require more time and effort to apply.

If you're using a UV clear spray, you'll need to apply it over the painted lure to protect the color from fading. This type of clear coat is easy to use and provides good protection, but it may not be as durable as a two-part epoxy.

Before applying the clear coat, it's important to ensure that your lure is clean and free from any dust or debris. You may need to lightly sand the surface of the lure to create a better bond with the clear coat.

In terms of application, you can either brush on the clear coat or dip the lure into a container of clear coat. The method will depend on the size and shape of your lure. If you're brushing on the clear coat, make sure to use a fine brush and apply it evenly to avoid streaks or drips.

Once the clear coat is applied, you'll need to let it cure according to the instructions provided with the specific product you're using. This can take anywhere from a few hours to several days, so be patient and allow enough time for the clear coat to fully harden.

Remember, the purpose of clear coating is to protect your lure and enhance its appearance. It's important to follow the instructions provided with the clear coat product you're using and experiment with different techniques to achieve the desired results.

I hope this helps! If you have any specific questions or need further clarification, please let me know.

Related videos

Transcript

04:36

04:52

Video

Soft Plastic Lure Painting Instruction by LureWorks Kits | Bass Fishing by Bass Fishing Tips & Techniques by BassResource → This is one we just painted and this is the same bait we painted and added the clear coat to it so you can see the really 3D effect it gives it. It makes a big difference. They are ready to fish.

Transcript

13:22

15:35

Video

Lure Foiling - how I foil my handmade fishing lures by zimmtex → you'll need to wear a respirator and all the protection and everything just like normal the only drawback with these alcohol inks that I've found so far is that they are not UV stable so once you've got that painted onto your lure you're going to have to come back over it with something like this UV clear spray and that will protect the color from fading then you can put your clear coat of choice over the surface I haven't used every clear coat Under the Sun but those that I have used tend to work pretty well now I do like a thicker clear coat and the reason being is there's a little Edge on this foil that I mean it's very fine but it's there you can feel it and so if you put a pretty thick clear coat over it it'll smooth that out and then you can come back and paint over that over that top and you won't even see the seam so that's it I hope you found this video useful if you did please subscribe and give me a thumbs up so that I know to make more content like this thanks for watching and I'll see you on the next one

Transcript

28:18

31:00

Video

Handmade Chamelion Trout Fishing Lure - a how to guide on painting wooden fishing lures by zimmtex → I think I'm going to add a little bit of orange on this throat area here and so what I've done is I've mixed up a pretty dark orange in my airbrush here and we're just going to lightly Mist that over the throat area foreign foreign so I'm ready to clear coat this lure um ordinarily I would use a two-part epoxy to cover the whole thing and that would be a really good solid uh clear coat but I don't really want to use that on this lure because that paint that I've put on there has created a really uh interesting texture over the whole lure which I think gives it a little bit extra pop so what I'm going to use is this KBS Diamond clear spray it's not going to be as tough as a two-part epoxy but it will protect the paint and waterproof it and it'll also preserve that texture oh and we'll set this aside and let this cure before I try and assemble the whole thing since I didn't do my traditional clear coat over this with resin I'm going to go around this lit the edges of this lip and seal that lip really well to the body now that these are cured we can go ahead and attach the two pieces together I've mixed up some more epoxy I'm just going to put it on both of those all right and then we just let that cure

Transcript

04:40

07:11

Video

Detail painting a bass and casting a resin bluegill swimbait. by zimmtex → I believe I'm ready to put the first clear coat on this thing and I'm going to be using KBS Diamond clear which I've got in my jar here however this time I'm going to be changing my process slightly I'm going to hang it and let it drip rather than rotate it hang it like so I am going to have to brush it on because of the size of this lure I can't dip it obviously so I've got a fine brush here that I will I will be using and then I've also got some KBS thinner to clean my brush after I'm done equipment wise I'm going to be using a respirator of course and then I've got my fan set up with another filter here this one's a carbon filter so it should help capture some of those fumes and then I've also got some vinyl gloves so let's go ahead and get that first clear coat put on here's a look at where we're at I'm pretty pleased with how this is coming along actually um I did go ahead and put some eyes on there you can see but I think from here uh all we lack is putting a decal and signature and one last clear coat over it and the body should be done one thing I will say is it turned out to be pretty unnecessary for me to have foiled this thing because I put so much paint over

Transcript

02:22

04:36

Video

Soft Plastic Lure Painting Instruction by LureWorks Kits | Bass Fishing by Bass Fishing Tips & Techniques by BassResource → Since that paint is still wet, we can just use it as the glue to attach these eyes. These eyes are soft PVC eyes. They are flexible. We just stick them in that slot there. I am going to speed up the drying of this so we can dip this bait in the hot plastic. So I am going to use a regular blow dryer. [pause] Okay. I am going to take a hook. I got to have something to attach this with so I can dip it in the plastic. So we will just use the hook. You might let this dry a little bit longer but it is still dry enough to dip in this plastic. This is a product we call Clearasol and it's a plastisol especially made to put a coating on this outside. I am going to just dip it in here. You see how it looks now. It is shiny but it doesn't really have a really 3D look. Once we dip it in here, we pull this out and it gives it a really nice 3D effect. Okay. This will be cooled down in just a few minutes here. It is almost dry to the touch now. If you look at the nice depth you get there. Once it is cooled down, we will snip this little end off of it. I have got some other baits here we have already painted. This is a Fire Tiger.

Transcript

25:01

27:47

Video

Grouper Glidebait Lure Making (Part 2) by zimmtex → version so I thought I'd give this a try and see what it's all about I know a lot of people use it foreign here's a quick look at my drying wheel setup I can you can see I've got my pieces on opposite ends and then I've counter balanced this side and that's so that when it turns over it doesn't slam over because that repeated slamming can cause these pieces to shake loose out of their clamps so you want to have a a balanced wheel that's pretty smooth this one's still got a little bit of a jump to it right there but that's not gonna be enough to knock this off of its uh wheel all right so I think that's nice and cured the instructions say it can take up to seven days to get a full cure but it's been over 24 hours and it's dry to the touch it's no tackiness left feels pretty hard um I will say what I really like about this clear coat is that it leaves a lot of that texture on there all that carving that I did you can still feel it some of the clear coats I use they would fill that in completely and it would just be a smooth um shiny finish but I I like having that texture on there I think I think that's a really cool aesthetic to have on it

Have a question? Ask FishGPT

Q&A AI

More General Answers