deps new MAD WAVER #10 Dead Grass Color 5/8 oz Buzzbait Buzz Bait NEW Japan

Description deps new MAD WAVER 5/8 oz Buzzbait A wave that attracts big bass. The buzz bait "Mad Weber", which boasts a high big bass capture rate with the concept of "attracting the fighting spirit and feeding habits of bass at the same time", has been refined by replacing it with a souped-up Weber prop that provides even stronger water current stirring ability. The head design of the "Mad Weber" prioritizes the strong water current stirring action of the Weber prop and long casting performance over the floating performance required of a buzz bait, and the overwhelming presence of the flashing and knocking sound of the Colorado assist blade strongly appeals to bass even on rough lake surfaces and flowing water areas, and enrages even savvy big bass that do not respond even when their feeding habits are appealed to. In addition to the surface tracing with medium to high speed retrieval, the torque-up wake and tight vibration with a slow retrieve on the subsurface demonstrate amazing power that strikes even low-activity bass that cannot be caught by buzz baits and slow bass that cannot chase spinner baits. This is a unique buzz bait created from a concept that is not limited to traditional buzz baits. ◾️HEAD WEIGHT AND ARM LENGTH Adjusted to match the Weber prop, which has been souped up by approximately 13% ◾️ARM FORM&HOOK ANGLE SETTING The arm design and hook reduce the poor bite that is typical of buzzbaits, and the highly elastic Φ1.0mm wire has just the right amount of flex at the in-point angle to increase the hook-up rate. The arm design, which resonates with the compound vibration created by the Weber prop and assist blade, was carefully selected through actual fishing tests to create the setting that produces the most fish. ◾️ASIST BLADE(Colorado#3.5) The Colorado #3.5 assist blade is stirred up by the souped-up Weber prop and emits realistic flashing as it thrashes about. It occasionally grabs water and increases the momentary resistance of the water current, causing it to lose its balance and stumble. The high-pitched knocking sound and momentary fluttering caused by contact with the Weber prop make it appealing even on choppy lake surfaces and in flowing waters, providing more effectiveness than you would expect. In addition, it firmly grabs water on sub-surface retrievals and provides a tight vibration in combination with the vibration of the Weber prop, inviting you to a new stage never reached with conventional buzz baits. ◾️WAVER PROP The Weber prop, with its uniquely designed long hole shape and angle in the rear hole, effectively incorporates the physical elements of centrifugal force and water current resistance, creating a completely new effect. The two fulcrums, which change depending on the prop's rotation speed and water current resistance, which differ depending on the retrieve speed, create a chain reaction of flapping and back and forth sliding motion with the upper arm as the central axis. This creates a strong vibration and friction sound that was not available in conventional buzzbait props. To prevent the prop from getting tangled with green algae, torn weeds, etc., which can hinder the rotation of the prop, we have deliberately eliminated the beads and caps on the tips of the props to prevent debris from getting tangled. In fact, the simple structure prevents complicated tangling, eliminating the hassle. ◾️HEAD DESIGN The B Custom head, with its head weight adjusted to match the souped-up Weber prop, creates a strong water stirring effect not found in conventional buzz baits, and boasts excellent straight-line stability that does not lose balance even on high-speed retrievals. ◾️HEAD ACTION Its irregular reaction to avoid even the slightest change in water current creates a wobbling action that rolls from side to side, realistically recreating the movements of a fleeing baitfish. This wobble, combined with its excellent straight-line stability, efficiently leads bass to strike, even in fast-flowing waters. ◾️TRAILER HOLD WIRE&Ex.SHARP CUSTOM HOOK The custom-made narrow bent hook (#5/0) has a long shank and provides just the right amount of flex to soften the bite, while also ensuring that you can hook a big bass from a long distance. ＊Please note that due to the structure of the wire bait, repeatedly pulling out fish or hanging it from the bait, or repeatedly deforming or adjusting it, may put stress on the arm and cause it to become deformed or break. Shipping We will ship by DHL or FedEx or Japan Post. Notice to International Buyers For U.S. Buyers Import duties are already included in the item price and shipping cost. You will not need to pay any additional customs duties. Please purchase with confidence. For Buyers Outside the U.S. Import duties and taxes are not included in the item price or shipping cost. However, please note that the item price already reflects the U.S. import duties. If you would like to discuss the price, feel free to send us an Offer or Message. Remote Area Delivery If the delivery address is located in a remote area, FedEx or DHL may charge an additional fee. In such cases, you may be asked to pay an extra $15?$20. Thank you for your understanding.